#Craig analog to digital converter box manuals
#Craig analog to digital converter box tv

Press that button to access the set-up menu.

Digital-to-analog converter boxes and digital televisions have a button, usually on the remote control that is labeled “set-up” or “menu” or some similar term. If you still do not see a set-up menu or picture, recheck your connections.Perform a Channel Scan.

#Craig analog to digital converter box tv

If you do not see a set-up menu or picture, tune your TV to channel 4. You should see a set-up menu or picture displayed on your TV screen. If you have a digital-to-analog converter box, tune your analog TV to channel 3. Ensure all components are plugged in and have their power turned on.

#Craig analog to digital converter box manuals

Refer to the owner’s manuals of your components if you are unsure of the proper connections. If using a digital-to-analog converter box, also ensure that the antenna output of your converter box is connected to the antenna input of your analog TV.

Make sure your antenna is connected properly to the antenna input of your digital-to-analog converter box or digital television. For more information on antennas, check out our guide.Check Your Connections. Reception capabilities of TV antennas vary considerably.Īlso, factors such as nearby buildings, trees, terrain or construction may affect reception. To receive UHF signals, an indoor antenna should also include a wire loop or other feature for reception in that band. For example, the commonly used “rabbit ears” indoor antenna is only suitable for receiving VHF signals. Many antennas are designed only for reception of either VHF or UHF signals (but not both). You need an antenna that provides good reception of both VHF signals (channels 2-13) and UHF signals (channels14 and above) to reliably receive all of the digital signals broadcast in your area. If you are having difficulty receiving digital broadcast stations, this troubleshooting guide provides a connections checklist and tips for reception of digital signals.Use an Antenna that Provides Good Reception of All Channels. All full-power television stations broadcast only as digital TV, or DTV, following the transition from analog to digital broadcasting in 2010.